Learn More
Labconco™ WaterPro™ PS/HPLC Polishing System for Analytical Use

Labconco WaterPro™ PS/HPLC Polishing System for Analytical Use delivers Type I, 18.2 megohm-cm water with TOC less than 5ppb.
Supplier: Labconco™ 9000661
Alert:
Products in this grouping may have voltages other than the standard US 110/115V. Please review and confirm your selection before completing your order. Some of these products may not be returned.
Description
- Timed dispense for unattended operation
- Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time
- LED flashes actual megohm-cm when water quality falls below set point (water quality alert)
- Dispense manually from a valve or with dispensing gun at rate of 1.8L/min.
- TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels
- Corrosion-resistant Type 304 stainless steel front panel
- Unpigmented virgin natural polypropylene bowls w/o impurities to contaminate water
- Quiet 1/4 hp motor and rotary vane recirculation pump
- Moisture sensor detects leak and signals inlet valve to close and pump to shut down
- Wall mountable
Certifications
ETL listed (115V models); CE marked (230V models).
Specifications
CE | |
1.8 | |
18.2 | |
PS/HPLC Polishing System with Dispensing Gun | |
UK | |
Carbon filtration, deionization, organic adsorption, ultraviolet oxidation | |
31.1 in. | |
30.1 in. | |
7.5 in. | |
90 lb. | |
230 V 50/60 Hz | |
50/60 Hz |
Pretreated Tap | |
Type 1 | |
<5 | |
WaterPro PS/HPLC | |
2.5 A | |
TOC Less than5 ppb | |
78.9 cm | |
76.4 cm | |
19 cm | |
40.8 kg | |
230 V |
Your input is important to us. Please complete this form to provide feedback related to the content on this product.