Labconco™ XPert™ Nano Enclosures: 6ft. Width, Extra Deep With Built-in Ionizer

Keep hazardous powders and particulates contained during procedures

Supplier:  Labconco™ 3888662

Catalog No. 22-167-561

Description

Room air is pulled into the enclosure through the front, flows to the baffle and finally passes through a 99.99% ULPA exhaust filter before returning to the laboratory or cleanroom. Features built-in blower and Guardian™ airflow monitor. With built-in ionizer; separate filtered exhauster is not required.

• Ergonomic air foil with aerodynamic Clean-Sweep™ airflow openings; side spring pin releases air foil for cleaning
• Upper dilution air supply and containment sash foil with side-entry air foils
• Zone-perforated, rear baffle pivots down and removes for cleaning
• Exhaust ULPA filter, 99.99% efficient on 0.12μm particles; accessible from top for leak scanning of entire surface
• True bag-in/bag-out filter disposal system (requires certified technician)
• Built-in blower with dynamically balanced, vibration-isolated motorized impeller and speed control
• 40% Blower reserve allows speed adjustment (by certified technician) as filter loads
• Pressure gauge to monitor filter loading
• Guardian Airflow Monitor continuously monitors airflow; features visual and audible alarms if airflow is outside setpoint range

Construction

• Choice of interior depth (depending on width selected): 50cm (23.4 in.) or 76cm (30 in.)
• Type 304 stainless-steel interior sides, baffle, air foil and integral work surface
• Glacier white and gray, dry powder epoxy-coated aluminum and steel exterior
• Prewired fluorescent lamp and switches for blower and light
• 0.6cm (0.25 in.) Thick tempered safety glass front sash
• Sash opening 30cm (11.8 in.) height on 6 ft. models
• Ergonomically angled and hinged sash pivots upward, locks in up position; wiping seal contains contaminants
• 6 ft. models incorporate an external gas-assist lift
• Two utility ports for pass-through of electrical cords

Specifications

• Sash Opening: 11.8 in.
• At 100fpm Exhaust: 580cfm
• At 100fpm Noise: 67-69dbA
• At 80fpm Exhaust: 465cfm
• At 80fpm Noise: 61-63dbA
• At 60fpm Exhaust: 350cfm
• At 60fpm Noise: 55-57dbA

Ideal for nanoparticle manipulation and dry powder chemical handling

Order Info

Optional accessories include canopy connection, remote blowers, ductwork

Compliance

SEFA 1-2002; Modified ASHRAE™ 110-1995; ANSI™ Z9.5-1993; UL 3101-1/61010-1; CAN/CSA C22.2 No. 1010.1; CE Conformity Marking (230V models)

Specifications

• Product Type: Enclosure
• Material: Steel
• Chamber Material: Epoxy Coated Aluminum
• Depth (English): 35.6 in.
• Depth (Metric): 90 cm
• Dimensions (L x W x H): 35.6 x 72 x 47.5 in. (90.4 x 183 x 120.65 cm)
• For Use With (Application): Nanoparticle manipulation and dry powder chemical handling
• Height (English) Interior: 31.8 in.
• Height (Metric): 120.65 cm
• Hertz: 50 Hz
• Length (Metric): 90.4 cm
• Voltage: 230 V
• Width (English): 72 in.
• Width (Metric): 183 cm

• Lighting Type: Fluorescent
• Certifications/Compliance: CE
• Color: Glacier White, Gray
• Depth (English) Interior: 30 in.
• Depth (Metric) Interior: 76.2 cm
• Exhaust: ULPA filter
• Height (English): 47.5 in.
• Height (English) Sash Opening: 11.8 in.
• Height (Metric) Sash Opening: 30 cm
• Length (English): 35.6 in.
• Noise Level: 61 to 63 dBA
• Volume (Metric) Exhaust: 165.18 to 273.72 L/sec.
• Width (English) Interior: 70.8 in.
• Width (Metric) Interior: 179.83 cm