Vacuum Ovens
Vacuum Ovens
Fisherbrand™ Isotemp™ Model 281A Vacuum Oven
Standard capacity vacuum oven
Thermo Scientific™ Vacuum Ovens
Achieve maximum temperatures of 220°C (428°F) with this flexible oven, while benefiting from two control configurations and display options.
Thermo Scientific™ Lindberg/Blue M™ Vacuum Ovens
Benefit from a digital control, built-in over-temperature protection and a flexible vacuum/purge/release system for a range of applications with these ovens.
BINDER™ VDL Series Vacuum Drying Chambers for Flammable Solvents
VDL Series Vacuum Drying Chambers for Flammable Solvents ensure maximum safety when drying organic solvents.
BINDER™ VD Series Vacuum Drying Chambers for Non-Flammable Solvents
VD Series Vacuum Drying Chambers deliver excellent performance through precise temperature control and gentle drying.
Thermo Scientific™ Vacutherm Vacuum Heating and Drying Ovens
Dry up to six times faster than when using conventional units. These ovens feature excellent heat transfer and fast heating up time, minimizing operation time. A variety of options allow application-specific configurations.
Yamato Large-Capacity DP Series Vacuum Drying Ovens
Large chambers with powerful heaters that radiate heat to sample
Chemglass Life Sciences 0.6 Cu. Ft. Oven, Vacuum, 120V
The Vacuum ovens are durably constructed with seamless welds and strong bracing. All of the vacuum ovens are built with a stainless steel chamber for exceptional durability. Ovens incorporate solid brass vacuum valves with PTFE seats to prevent leaks. The double plenum design exceeds CE safety requirements resulting in a cool outer surface. The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life. A selection of gaskets (for specific applications) and a small footprint increase the versatility of these ovens. The unique cross-flow ventilation forces inert gas to fill the entire chamber. Users can choose from 3/8 inch orifices or a KF25 fitting to withstand heavy use, minimize draw-down time and achieve low vacuum levels. We offer a full line of gaskets to suit applications involving high temperatures, acids, or solvents. Ovens have a 24 month limited warranty.
Biosurface Technologies Corp CBR W/ 220 STANDARD STIR PLATE
The CDC Biofilm Reactor® consists of eight (8) polypropylene coupon holder rods suspended from a UHMW-polyethylene ported lid. Each coupon holder rod can accommodate three (3) 1/2-inch (12.7 mm) diameter coupons, for a total of twenty-four(24) coupons. The lid (with coupon holders and coupons) is mounted in a 1-liter glass vessel with side-arm discharge port. A liquid growth media or biocide is circulated through the vessel while mixing and shear is generated by a magnetic stir bar and vane rotated by a magnetic stir plate.Sampling of the coupons is conducted by aseptically removing individual coupon holder rods with accompanying coupons (3). The coupon holder (or blank) rod is replaced in the lid after sampling to allow the time-course experiment to continue. The coupon removed from the reactor vessel is then used for treatment evaluations, scraped or vortexed to collect the biofilm sample for further study.ĉĉĉĉĉĉĉĉĉĉCDC Biofilm Reactor with 220V Standard Stir Plate, Mid- to High-Shear Laboratory Biofilm Growth Device, BioSurface Technologies Corporation.ĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉ02-Apr-25 08:00:59:000 PMĉ
Biosurface Technologies Corp AN. CBR W/ 220 STANDARD STIR
The CDC Biofilm Reactor® consists of eight (8) polypropylene coupon holder rods suspended from a UHMW-polyethylene ported lid. Each coupon holder rod can accommodate three (3) 1/2-inch (12.7 mm) diameter coupons, for a total of twenty-four(24) coupons. The lid (with coupon holders and coupons) is mounted in a 1-liter glass vessel with side-arm discharge port. A liquid growth media or biocide is circulated through the vessel while mixing and shear is generated by a magnetic stir bar and vane rotated by a magnetic stir plate.Sampling of the coupons is conducted by aseptically removing individual coupon holder rods with accompanying coupons (3). The coupon holder (or blank) rod is replaced in the lid after sampling to allow the time-course experiment to continue. The coupon removed from the reactor vessel is then used for treatment evaluations, scraped or vortexed to collect the biofilm sample for further study.ĉĉĉĉĉĉĉĉĉĉAnaerobic CDC Biofilm Reactor with 220V Standard Stir Plate, Mid- to High-Shear Laboratory Biofilm Growth Device, BioSurface Technologies Corporation.ĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉ02-Apr-25 08:00:59:000 PMĉ
Biosurface Technologies Corp AN. CBR W/ STANDARD STIR PLATE
The CDC Biofilm Reactor® consists of eight (8) polypropylene coupon holder rods suspended from a UHMW-polyethylene ported lid. Each coupon holder rod can accommodate three (3) 1/2-inch (12.7 mm) diameter coupons, for a total of twenty-four(24) coupons. The lid (with coupon holders and coupons) is mounted in a 1-liter glass vessel with side-arm discharge port. A liquid growth media or biocide is circulated through the vessel while mixing and shear is generated by a magnetic stir bar and vane rotated by a magnetic stir plate.Sampling of the coupons is conducted by aseptically removing individual coupon holder rods with accompanying coupons (3). The coupon holder (or blank) rod is replaced in the lid after sampling to allow the time-course experiment to continue. The coupon removed from the reactor vessel is then used for treatment evaluations, scraped or vortexed to collect the biofilm sample for further study.ĉĉĉĉĉĉĉĉĉĉAnaerobic CDC Biofilm Reactor with Standard Stir Plate, Mid- to High-Shear Laboratory Biofilm Growth Device, BioSurface Technologies Corporation.ĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉĉ02-Apr-25 08:00:59:000 PMĉ
Electron Microscopy Sciences Vacuum Oven Model 3606, 240 V, 8"W x 8"H x 12"D chamber, 0.44 cu. ft (12.5L) Capacity
Top-mounted independent evacuation and venting vacuum fittings.
Chamber: 8"W x 8"H x 12"D
Capacity: 0.44 cu. ft (12.5L)
Thermometer: Dial