Air-Purifying Respirator Cartridges and Filters
Air-Purifying Respirator Cartridges and Filters
Air-purifying respirator cartridges and filters are installed in reusable half-mask or full-facepiece respirators to provide protection from airborne contaminants. Products are designed to protect against a variety of individual contaminants or combinations of contaminants, including dusts, particles, mists, aerosols, fumes, gases, and/or vapors.
Some products protect against both particulate and gaseous contaminants, however, there is no single filter and cartridge combination that protects against all substances.
Correct product selection depends on the environment(s) in which the product will be used and the type(s) of hazard(s) or risk(s) expected in the selected environment(s). NIOSH-rated cartridges and canisters use a color-coding system for secondary identification.
Product service life depends on many factors, including environmental conditions, breathing rate, cartridge filtering capacity, and the quantity of contaminants in the air. Regulatory compliance details for each filter and filter/cartridge package can be obtained at the individual product level and should be carefully scrutinized during selection.
3M™ Particulate Filter 2078, P95 Respiratory Protection/Nuisance/Acid/Gas/Organic Vapor
NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against nuisance levels of organic vapor/acid gases and for ozone protection up to 10X OSHA PEL.
3M™ 6000 Series Cartridges
NIOSH-approved cartridges for use with 3M™ full and half facepiece respirators 6000, 7000 and FF-400 Series.
Dentec Safety™ N95 Respirator Filter Pads
Dentec Safety™ N95 Respirator Filter Pads features an ultra thin design that will fit under any grinding shield or welding helmet.
Scott Safety™ MPC Plus Cartridge
99.99% efficient filtration of aerosols and solid particulates for effective protection against numerous biological agents
3M™ P100 Hydrogen Fluoride Cartridge/Filter (Style 7093C)
The 3M™ Hydrogen Fluoride Cartridge/Filter 7093C is NIOSH approved and provides protection against hydrogen fluoride and oil/non-oil based particles.
Scott Safety™ CBRN Cap-1 Canister
99.99% efficient filtration of aerosols and solid particulates for effective protection against numerous biological agents
3M™ Secure Click™ Respirator P95 Particulate Filter
Secure Click™ Hard Case D9000 Series Particulate Filters are approved for use with 3M™ Secure Click™ Respirators in environments containing dust, mists, and fumes.
3M™ Secure Click™ Respirator Hard Case P100 Particulate Filter
Secure Click™ Hard Case D9000 Series Particulate Filters are approved for use with 3M™ Secure Click™ Respirators in environments containing certain particles common in the construction, agricultural, and pharmaceutical industries.
3M™ 2076HF Hydrogen Fluoride/P95 Particulate Filters
With Nuisance Level† Acid gas Relief
3M™ 5000 Series Respirator Accessory, Filter Retainer 501
Used to hold 3M™ Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M™ Respirators 5000 Series and 3M™ Cartridges 6000 Series and 3M™ Filter Adapter 603.
