Electron Microscopes
Electron Microscopes
Thermo Scientific™ VitroEase™ Training Kit
The Thermo Scientific™ VitroEase™ Cryo-EM Training Kit provides a complete solution that includes detailed instructions for the successful preparation of grids for cryo-electron microscopy single particle analysis.
Thermo Scientific™ VitroEase™ Training Kit PROMO
The Thermo Scientific™ VitroEase™ Cryo-EM Training Kit provides a complete solution that includes detailed instructions for the successful preparation of grids for cryo-electron microscopy single particle analysis.
Ted Pella Inc PELCO TEM Grid Storage Box
Widely used compact grid box for 50 standard 3.05mm TEM grids with smoothly sliding clear plastic cover is matched to a tough, clean, self-lubricating base. The diamond-shaped grid compartments are designed to minimize awkward wrist or hand movements. The depth of the holes restricts grid movement when transported. The materials selected for the PELCO Grid Box are static dissipative to avoid static charges on the grids. Dimensions: 77.5 x 41 x 9mm.
Ted Pella Inc Carbon Tape, 8mm W x 20m L
Both sides of the tape have a thick conductive adhesive (conductive inner film is 35µm and the adhesive is 45µm on each side for a total of 125µm [5 mils]) with a white liner. The double adhesive and conductive design permits quick mounting of samples without using liquid or colloidal adhesives. The tape is relatively solid and non-porous and does not absorb small samples. The variety of widths affords efficient application to various specimen mount surface sizes. Thickness is 0.16mm. Available in six widths. Can be used down to -20°C (-4°F) and temperature maximum is 60°C (140°F). Available in 5, 8, 12, 20, 25, and 50mm W x 20m L (0.19, 0.31, 0.47, 0.79, 0.98, and 1.96" x 21.8 yd). Core diameter is 76mm (3"). SEM mounts not included.
Ted Pella Inc PELCO X-TREME SEM Storage Box and holder for up to 18 of the 12.7mm SEM pin mounts
Very strong and rugged clear polycarbonate box to store standard pin mounts with 3.2mm (1/8"). This box is watertight, crushproof and dustproof. The strong hinges, locking clasps and soft silicone O-ring seal makes this an ideal transport, shipping and storage box for SEM samples on pin mounts. The holder insert is numbered 1-18 and accommodates all types of pin mounts form 6.4 to 50mm diameter.
Ted Pella Inc Ultrathin Carbon Film on Lacey Carbon Support Film, 300 mesh, Gold, 25/pk
Pure carbon support films with no Formvar backing. This new product has an even thinner carbon film which is mounted on a Lacey carbon film. The carbon support layer lying over the holes is less than 3nm in thickness and is the thinnest support film available. It is particularly useful for high resolution microscopy of low contrast particles and is also ideal for use with the Energy Filtering TEM.
Electron Microscopy Sciences AFM Substrate Type P Silicon Wafer 6", 150 mm diameter, <100> Orientation
These silicon wafers can be used for substrate studies or as substrate for AFM and SEM samples by cleaving the wafer. The wafers are polished on one side.
Diameter: 150 mm
Orientation: <100>
Thickness: 600-690 µm
Roughness: 2nm
Resistance: 1-30 ohms
Ted Pella Inc COPPER CONDUCTIVE TAPE 12.7MM
Tape, Conductive; Copper; 3M; Single Adhesive Surface; 12.7mm; The tape offers excellent conductivity through the foil backing; Foil Thickness: 0.04mm; Total Thickness: 0.07mm; Resistance through Adhesive: 0.005 ohm
Ted Pella Inc CARBONTAB W/AL FOIL 12MM 100PK
Carbon Tabs with Al Foil Backing, 12 mm, 20 tabs per sheet, package of 100; TED PELLA INC mfg# 16091-12
Electron Microscopy Sciences AFM Substrate Type P Silicon Wafer 3", 76 mm diameter, <111> Orientation
These silicon wafers can be used for substrate studies or as substrate for AFM and SEM samples by cleaving the wafer. The wafers are polished on one side.
Diameter: 76 mm
Orientation: <111>
Thickness: 345-470 µm
Roughness: 2nm
Resistance: 1-30 ohms
Ted Pella Inc PELCO Tabs™, Carbon Conductive Tabs, 6mm OD
The simplicity of application and smooth, clean surfaces of PELCO Tabs™ Carbon Conductive Tabs are a significant improvement compared to many of the other common adhesives that have been used in SEM mounting. Both tab sides have a thick conductive adhesive (conductive inner tab is 35µm and the adhesive is 45µm on each side for a total thickness of 125µm [5 mils]) with a liner on both sides, a transparent liner and white liner respectively. They are ready for immediate use. The top protective liner does not have to be removed until the sample is ready to be mounted. This reduces possible contamination. Outgassing is negligible.