Electron Microscopy Supplies
Electron Microscopy Supplies
Thermo Scientific™ VitroEase™ Training Kit
The Thermo Scientific™ VitroEase™ Cryo-EM Training Kit provides a complete solution that includes detailed instructions for the successful preparation of grids for cryo-electron microscopy single particle analysis.
Electron Microscopy Sciences Kwik-Gard Sylgard™ Dispensing tips
The Kwik-Gard is specially packaged Sylgard184 silicone that offers a quicker and easier way to apply the silicone, eliminating the messy procedure of preparing the mixture before application. Its special cartridge controls the precise mixing ratio to ensure proper curing. The disposable tip mixes resin and hardener as they are dispensed. Since no air is introduced during mixing, the resin does not need degassing for most applications. The mixed silicone is applied directly to the site, reducing preparation time and material waste.
Each Kwik-Gard cartridge contains 37 mL of resin and hardener. The dispensing tip has a dead volume of 0.75 mL. Curing time for this silicone is 24hrs@25 degree C, 15 min.@150 degree C. Tip has dead volume of 0.75 mL.
Electron Microscopy Sciences Optical Resolution Grid with line pitch of 2 mm
Consists of elements of 5 bars ranging from 1 line per mm to 18 lines per mm, with adjacent numbers indicating the number of lines per mm. Produced as a vacuum deposited chrome image on 75 mm x 75 mm glass.
Electron Microscopy Sciences Optical Resolution Grid with line pitch of 1 mm
Consists of elements of 5 bars ranging from 1 line per mm to 18 lines per mm, with adjacent numbers indicating the number of lines per mm. Produced as a vacuum deposited chrome image on 75 mm x 75 mm glass.
Electron Microscopy Sciences EMS Equipment Stage 6" Stub Holder
These specimen stages are all easy-change, drop-in style (no screws), and are height adjustable. A 6" stub holder to accept up to 27 1/8 pin stubs. Compatible with EMS300TT, EMS300RT, and EMS300TD.
Electron Microscopy Sciences EMS Equipment Stage Fibre
These specimen stages are all easy-change, drop-in style (no screws), and are height adjustable. A stage accept single fibres or pins up to 1 mm diameter rotating horizontally to achieve all round coating. Compatible with EMS150T and EMS150R.
Electron Microscopy Sciences EMS Equipment Stage Rota Cota
These specimen stages are all easy-change, drop-in style (no screws), and are height adjustable. Rota Cota planetary stage has 6 stub positions for 15mm, 6.5mm or 1/8" pin stubs. Tilts up to 30° from horizontal (same as #4521, 6402, 6553). Compatible with EMS150T, EMS150R.
Electron Microscopy Sciences EMS Equipment Stage Slide
These specimen stages are all easy-change, drop-in style (no screws), and are height adjustable. Microscope slide stage for up to two 75 mm x 25 mm slides or eight stub positions for pin stubs. (same as #3370, 4520, 6403, 6554). Compatible with all EMS series.
Electron Microscopy Sciences EMS Equipment Stage Tilt
These specimen stages are all easy-change, drop-in style (no screws), and are height adjustable. Rotate-tilt stage with six stub positions for 15 mm or 6.5 mm or 1/8" pin stubs. Tilts Up to 90° from horizontal (same as #3340, 4519, 6400-S, 6551). Compatible with EMS series.
Electron Microscopy Sciences EMS Equipment Stage 6" Wafer
These specimen stages are all easy-change, drop-in style (no screws), and are height adjustable. Adjusts to accept 4" & 6" wafers comes with 4500-7, a 6" stub holder to accept up to 27 1/8 pin stubs (same as #6547). Compatible with EMS300.
Electron Microscopy Sciences EMS Equipment Stage 9 Place Coverslip
These specimen stages are all easy-change, drop-in style (no screws), and are height adjustable. A Stage to accept 9 20X20 cover slips. The top part of stage lifts off and has a mechanism to lift the cover slips for easy removal. Compatible with all EMS series.
Electron Microscopy Sciences EMS Equipment Stage 8 Place Stub
These specimen stages are all easy-change, drop-in style (no screws), and are height adjustable. 8 places for 25 or 30mm Polished embedded samples. Includes a polished Brass Tally. Compatible with all EMS series.
Electron Microscopy Sciences Quantifoil Holey Carbon Film S 7/2 on Copper 400 mesh Grid
QUANTIFOIL is a perforated support foil with pre-defined hole size, shape and arrangement. It has advantages in electron microscopy (EM) or low-energy electron point source (LEEPS) microscopy when compared with conventional holey film.
QUANTIFOIL with square holes and relatively narrow bars can be used in EM to support a thin carbon film, which by itself is too fragile to span a grid square. Alternatively, this holey film can directly support an object that is larger than the holes.
Electron Microscopy Sciences Quantifoil Holey Carbon Film R 1/4 on Gold 300 mesh Grid
QUANTIFOIL is a perforated support foil with pre-defined hole size, shape and arrangement. It has advantages in electron microscopy (EM) or low-energy electron point source (LEEPS) microscopy when compared with conventional holey film.
QUANTIFOIL with circular holes is used in cryo-electron tomographic reconstruction. The roundness of the holes is advantageous with respect to the formation of an ice layer of constant thickness. The whole size chosen depends on the magnification used, and on whether or not one wishes to include support film in the image. Assessment of the image quality is easier when foil is included in the picture, because the power spectrum of a foil is stronger than that of unsupported ice.
Grid: Gold
Mesh: 300
Electron Microscopy Sciences Quantifoil Holey Carbon Film R 2/4 on Copper 400 mesh Grid
QUANTIFOIL is a perforated support foil with pre-defined hole size, shape and arrangement. It has advantages in electron microscopy (EM) or low-energy electron point source (LEEPS) microscopy when compared with conventional holey film.
QUANTIFOIL with circular holes is used in cryo-electron tomographic reconstruction. The roundness of the holes is advantageous with respect to the formation of an ice layer of constant thickness. The whole size chosen depends on the magnification used, and on whether or not one wishes to include support film in the image. Assessment of the image quality is easier when foil is included in the picture, because the power spectrum of a foil is stronger than that of unsupported ice.
Grid: Copper
Mesh: 400